I hate to start a new thread but his install is kinda kicking my butt. I have electrical experience and I'm mechanical savvy. So on to the issue, the bike is a 2000 M900 carbed, not FI. I have layed out the wiring and drawn a diagram of how they will splice together, but i have 4 wires that are not on my wiring schematic. A Black/Purple, Black/Green, Blue/White, Black. Now I'm assuming the Black and Black together but the others have me puzzled. Also anyone with experience on this install, Can you please give some advice on issues you had during install. Thanks

Was this bike converted to carbs? I don't find said bike in my manuals

edit: Found this from a 99 M900, hope it helps

https://www.dropbox.com/s/gsju2a7jv10t5og/Electicral%20colours.pdf
https://www.dropbox.com/s/84khmv7hg0orogg/M900%20Electrical%20diag.pdf

My mistake. It is a 2000 not an 2002.

Quote from: M900Dark on May 21, 2014, 12:23:37 PM
My mistake. It is a 2000 not an 2002.

then the links should work

Thats the same one i have. It doesn't show the Black/Green, Blue/White and Black/Purple coming from the Speedo/Tach connector.

Does anybody have the Service manual?

The wires are in the Monster harness correct? Do you have any wires that were supposed to be a specific color and aren't? What do the unknown wires lead to? Were they bundled with other wires? Any connectors on the end?

I had wires that were different colors in my harness that took some sleuthing to figure out.

They are in the harness/connector that connects to the back of the speedo/tach. No i do not know where they go. I can't find the manual for the bike and I've found the one i need but i can zoom in enough to read the wiring colors.

pm me your email and tomorrow I will link you the manual for your bike or the one you want, just let me know in your pm