S2r 100 belly pan

cody_clark · November 22, 2014, 07:13:49 PM

I just received my belly pan from a guy on ebay and I got a picture for you all to see.

I,think it really pulls the look together

Duck-EZ · November 24, 2014, 01:03:30 AM

I thought one was suppose to stick on a thermal barrier to keep the CF from toasting.

cody_clark · November 24, 2014, 02:29:49 AM

It has a thermal barrier on the business side of it I just didn't snap a pic of that.

Duck-EZ · November 28, 2014, 08:59:42 PM

Ah! Carry on my good sir!

hackers2r · November 29, 2014, 11:34:41 AM

I believe that is mounted incorrectly. I checked through pictures of similar pans and it seems yours is mounted way too low. I predict it is going to scrape while riding at that height. I had purchased the same style one a while ago for my S2R 800 and had problems with the mounting points as I believe it is meant for the older Monster mounting points.

cody_clark · November 29, 2014, 11:59:21 AM

Well its as high as it will go with the udder there. And I was looking and I can get it a little higher but I'll have to do some trimming. And I checked out motowheels website and it said that this belly pan,would mount to my monster

cody_clark · November 29, 2014, 12:04:07 PM

And I just measured it I have a good 6 to 7 inches of space underneath before anything hits.

kopfjÃ¤ger · November 29, 2014, 12:32:11 PM

Quote from: hackers2r on November 29, 2014, 11:34:41 AM
I believe that is mounted incorrectly. I checked through pictures of similar pans and it seems yours is mounted way too low. I predict it is going to scrape while riding at that height. I had purchased the same style one a while ago for my S2R 800 and had problems with the mounting points as I believe it is meant for the older Monster mounting points.

Correct.

thorn14 · November 29, 2014, 12:43:35 PM

Both of my stock headers have scrapes from previous owners bottoming out on things. A speed bump would likely be a bad experience.

Looking at the bottom of the belly pan, you should see the x pattern for the older style headers which go on the left and right side of the bike instead of the S2R right side stacked exit.

cody_clark · November 29, 2014, 02:07:10 PM

Well I guess I'll go to modifying it so it'll fit up higher.

thorn14 · November 29, 2014, 02:19:48 PM

It should just be the udder area that's messing it up.

kopfjÃ¤ger · November 29, 2014, 02:32:36 PM

I don't think it's made for the '100'

hackers2r · November 29, 2014, 09:55:28 PM

I absolutely agree...anything can be made to work...that's what makes things unique. I was just advising against riding it the way it was mounted as it would likely result in damage to the new piece if not more due to scraping. I ended up returning mine as the modifications needed were pretty extensive if I remember, including creating a mounting point on the left side of the bike that the S2R models didn't have.

cody_clark · November 30, 2014, 05:34:26 AM

No I completely understand. Thanks for looking out

I appreciate it and I'll go look at it today and do some trimming and I'll post another pic when I finish

Skybarney · December 01, 2014, 04:17:10 PM

Don't forget to wear a mask when cutting it or sanding it. CF is nasty on the lungs.

News:

S2r 100 belly pan