News:

Welcome to the DMF

 

ISO intel on GRP Deepton Highmounts of 'Classic' monsters

Started by Slide Panda, April 23, 2015, 05:10:22 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Slide Panda

April 23, 2015, 05:10:22 AM
Specifically, how are they supported on a 620, 800, 900 etc. Do they bolt to the stock rearsets or use a hanger from rear of the frame.

Haven't found any photos that show what's up for the classic DSS monsters. On the 696 the are hung from the tail, but I'd rather not assume they did it the same for the older set.

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

ducpainter

#1
April 23, 2015, 07:26:26 AM
They mounted to the frame inside the grab handles...

like these Arrows.

"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”


Slide Panda

#2
April 23, 2015, 07:29:25 AM
Danke DP!

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

ducpainter

#3
April 23, 2015, 07:36:57 AM
Lots pf people did the high pipe mod when going to aftermarket rearset5s because the brackets to hang low mounts were almost as much money.
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”


Slide Panda

#4
April 23, 2015, 07:46:50 AM
Yeah I presently have cycle cat rearsets, with no boom for low mount supports - and of course that means that any of the high mounts that that used the stock rear sets for support won't do
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

ducpainter

#5
April 23, 2015, 08:10:37 AM
I've never seen a high mount attached to the rearset bracket.
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”


Slide Panda

#6
April 23, 2015, 08:16:32 AM
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

ducpainter

#7
April 23, 2015, 08:31:42 AM
Seems like the hard way.

Flip that clamp around, slide it back, and add an Adele clamp to the frame. ;D
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”


Slide Panda

#8
April 23, 2015, 08:40:16 AM
Yeah, definitely seemed like the hard way to go at it. But there they are. Seen some others that had tabs on the S-pipes to use that same mount.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.
Print
Go Up Pages1
User actions