News:

This Forum is not for sale

 

Cleaning ur bike

Started by Labbedds, July 26, 2008, 04:08:07 PM

Previous topic - Next topic

Labbedds

So I've tried alot of different products and I'm pretty sure I've found the two that I'll use forever.
#1 Next Dimension spray and polish (for all painted surfaces, waterless ;D), just spray and wipe this stuff is amazing
#2 Simple green, for the wheels and some engine pieces, first wet wheels to get excess brake dust off, then spray directly on, then use a kitchen long handle brush and WHAMMO!, rinse and wheels looky like dis.





Wawawiwa

desmoquattro

Not sure what SimpleGreen would do to paint. Guess you can be our guinea pig  ;D

The bike looks great though!
My Vices
'09 1198s,red, (Il Diavolo Rosso
'09 KTM 690 SMC (Thumpy)
'04 Yamaha FZ1, The Blue Cockroach
'01 900SS, custom yellow, (The Bumblebee)
'05 MS4R, blue

Labbedds

lol, yeah all i know is it works really well, i used another off brand from kragen and it discolored the paint so I had to buff it out, simple green no discoloration, and if it does, I might just paint em black  ;D  Thanks, you coming out with us tomorrow?  Marina starbucks off chestnut street, Vindingo, me, +?????
Wawawiwa

desmoquattro

Quote from: labbedds on July 26, 2008, 04:23:28 PM
lol, yeah all i know is it works really well, i used another off brand from kragen and it discolored the paint so I had to buff it out, simple green no discoloration, and if it does, I might just paint em black  ;D  Thanks, you coming out with us tomorrow?  Marina starbucks off chestnut street, Vindingo, me, +?????

Wish I could, but I've got a ton of things to do. I'd love to test out the new ASV shorty levers BikerGoddess got me. But way too much to get done.
My Vices
'09 1198s,red, (Il Diavolo Rosso
'09 KTM 690 SMC (Thumpy)
'04 Yamaha FZ1, The Blue Cockroach
'01 900SS, custom yellow, (The Bumblebee)
'05 MS4R, blue

Cynic

Thanks for the tips!

My bike needs to be cleaned... it's horrible. 

Makes people cry when they see it  :'(
I love my RED 620!
Check out my Blog about my Moto Adventures
http://motocynic.wordpress.com/

duckwrench13

Of all the things I've lost, I miss my mind the most.

Gettin' blow'd up sucks!
Combat Veteran, Operation Enduring Freedom, Afghanistan 2006-2007

Labbedds

That spot was a birthmark from the factory  [cheeky]
Wawawiwa

EEL

#7
Careful w/ simple green and aluminum..i heard they should never mix.  This is right off the simple green site

Aluminum - Is it safe to use Simple Green® on aluminum?
When used with caution and according to the instructions, Simple Green All-Purpose Cleaner has been safely and successfully used to clean aluminum. Simple Green All-Purpose Cleaner, Crystal Simple Green® Cleaner/Degreaser, Simple Green Pressure Washer Concentrates, and Pro Seriesâ,,¢ Simple Green® Automotive Cleaner have been used on aircraft, automotive, industrial and consumer aluminum items for over 20 years. However, caution and common sense must be used: aluminum is a soft metal that easily corrodes with unprotected exposure to water. The aqueous-base and alkalinity of Simple Green All-Purpose Cleaner can accelerate the corrosion process. Therefore, contact times for unprotected or unpainted aluminum surfaces should be kept as brief as the job will allow - never for more than 10 minutes. Large cleaning jobs should be conducted in smaller-area stages to achieve lower contact time. Rinsing after cleaning should always be extremely thorough - paying special attention to flush out cracks and crevices to remove all Simple Green® product residues. Unfinished, uncoated or unpainted aluminum cleaned with Simple Green products should receive some sort of protectant after cleaning to prevent oxidation.


Your wheels are painted on the outside but water drains through he center and can pool up in multiple places..just be careful..that is all

Labbedds

Good research, guess I need to be realllly careful w/ the stuff.  I don't leave it on long, and I do rinse the wheels w/ water before I scrub out the crud.
Wawawiwa

Popeye the Sailor

Quote from: labbedds on July 28, 2008, 04:47:59 PM
Good research, guess I need to be realllly careful w/ the stuff.  I don't leave it on long, and I do rinse the wheels w/ water before I scrub out the crud.


Never washing your bike will also help prevent accelerated corrosion from harsh cleansers.


Just sayin'.
If the state had not cut funding for the mental institutions, this project could never have happened.

Labbedds

yeah, i've always been a little ocd with my stuff
Wawawiwa

EEL

Quote from: someguy on July 29, 2008, 09:03:38 AM
Never washing your bike will also help prevent accelerated corrosion from harsh cleansers.

Perhaps you should show him an example photo so he has a better idea what you're talking about.

;D

Popeye the Sailor

Quote from: EEL on July 29, 2008, 11:07:52 AM
Perhaps you should show him an example photo so he has a better idea what you're talking about.

;D


One of these things is not like the other....

;D

If the state had not cut funding for the mental institutions, this project could never have happened.

MendoDave

I use simple green on the car & bike all the time. No prob with the paint.

When I used to get stuck washing the C-130 we tried all kinds of stuff before they started ordering Simple green by the 55 gallon drum. Wish I had one of those 55 gallon drums now.
Anyway it didn't seem to hurt the aircraft which was mostly made from aluminum.