anyone have a schematic or a "how to" for a tail chop of a later model M695?

ive seen a few threads on here about it but all of the pictures and links are broken.

also another thing, im located in Massachusetts and have been told that if i get an integrated tail light and loose the stock blinkers i will not pass inspection as they are nt 9 inches apart, any truth to this?

thanks in advance Smiley

Not a 695 specifically, but should be pretty similar:  http://www.ducatimonsterforum.org/index.php?topic=19650.0

Quote from: garethsmyth88 on June 21, 2017, 04:40:18 PM
anyone have a schematic or a "how to" for a tail chop of a later model M695?

ive seen a few threads on here about it but all of the pictures and links are broken.

also another thing, im located in Massachusetts and have been told that if i get an integrated tail light and loose the stock blinkers i will not pass inspection as they are nt 9 inches apart, any truth to this?

thanks in advance Smiley

I believe Mass. is the same as NH in regard to lighting. The spacing and locations are standardized by the US DOT and have to fall into those rules. That said, some shops don't follow that rule to the letter.