i have a set of rearsets, and bracket that is used to adjust them up and down, left and right broke off on me.
its the one with all the holes in this pic.
I'm looking to get that piece replaced, its aluminum, and i had it welded by a good shop, but it broke as soon as any weight was on it again.
I'm looking for the clutch side, i know this picture shows brake side.

I had some luck contacting PJ's parts a while back.

Or you could try our sponsor Monsterparts.

Quote from: howie on June 05, 2015, 12:57:43 PM
Or you could try our sponsor Monsterparts.

This

I just had this happed to my shifter side. Ehat was the outcome of this for you

I may have what you need. A couple years ago i had a get off and messed up those same rear sets....had to buy a whole new set, and have some left overs. I will need to look through my parts bin.....

Please let me know. I need the left side mounting.plate and the shifter arm if you have

Not able to post a picture at the moment, but here is a link. What you see is what I have available.

https://photos.app.goo.gl/Z7cYGtgjqtRZJhjx1

The footpeg has a very small amount of road rash, and will need a new bolt to attach.
The shifter peg is in the same condition.
Not sure if the shifter link arm is the correct one or not, but it's the one I have.
Other than the above, all the parts appear to be serviceable. That said,...Caveat Emptor...

Not really sure what they are worth, but i'm sure we can work something out.

First dibs go to the Djomlas as the original poster, and then to Ohm3d.

FYI, I think Rizoma no longer makes these rear set (PE202B, AKA "Rev" ).
There may still be some brand new sets available, but spare parts are no longer available.

Probably the best way to figure out if the brand new "parts" (not the whole set) are still available from Rizoma , is to contact Jeff at Monsterparts.com.

FYI if anyone ever breaks the Rizoma toe peg  on these the Ducabike Eccentric Toe Peg is an almost identical match.

https://motowheels.com/i-21798897-ducabike-eccentric-toe-peg.html

Quote from: herm on October 03, 2017, 06:57:47 AM
Not able to post a picture at the moment, but here is a link. What you see is what I have available.

https://photos.app.goo.gl/Z7cYGtgjqtRZJhjx1

The footpeg has a very small amount of road rash, and will need a new bolt to attach.
The shifter peg is in the same condition.
Not sure if the shifter link arm is the correct one or not, but it's the one I have.
Other than the above, all the parts appear to be serviceable. That said,...Caveat Emptor...

Not really sure what they are worth, but i'm sure we can work something out.

First dibs go to the Djomlas as the original poster, and then to Ohm3d.

I dont know if he is still looking, his post was from 2 years ago. I am interested in picking that stuff up as spares

Haha.....Never even noticed the original post date!

PM me with a fair offer and we will figure something out...