Quote from: Monstermash on May 12, 2008, 11:24:42 AM
I used less than two cans to do the last tank I did.

As far as the two part clear that is what I was trying to convey when I mentioned the clear with the catalyst. It will not be affected by spilling fuel on it as it is basically the same stuff used in body shops just being shot out of a spray can rather than a HVLP gun. 

How many coats did you get with 2 cans? Those dupli color cans barely gave me 1.5 coats per a can. I got 6 coats of clear on mine.

Quote from: He Man on May 12, 2008, 11:43:20 AM
How many coats did you get with 2 cans? Those dupli color cans barely gave me 1.5 coats per a can. I got 6 coats of clear on mine.

It's all relative depending on how heavy of a coat you put on. It's better to do many light coats rather than only a few heavy coats. Also keep in mind, the product I'm talking about is a little better quality than Krylon or Dupli Color.

OK, I just got back from the recommended local powdercoater.  He quoted me $530 for my frame and tank.  Good deal? 

Quote from: vampireduc on May 13, 2008, 02:25:33 PM
OK, I just got back from the recommended local powdercoater.  He quoted me $530 for my frame and tank.  Good deal? 

Your thinking of powdercoating your tank? I can see the frame but  idon't think I've ever heard of it being done to a tank.

Is the $530 including all the prep work? If so than it's not a terrible deal. My guy did a frame for a buddy of mine last year and it was $150 but we did all the prep work to get it ready for PC. 

I think the rattle can or spray bomb idea is ok only if you are skilled at painting with these techniques.  If you already went to all of the trouble to prep it, and you don't have much experience with painting, I would shell out the bucks and do it right.  I know you won't regret a good paint job, but you will always be looking at the lousy paint job wondering if you should have had it professionally painted.

I have a friend that has his own pro paint gear.  (no he isn't a pro...yes he has painted a lot before) I'm thinking that I'll skip the powdercoating due to cost right now and I don't want my frame and tank just sitting bare.  So, here is the good news.  Tank prep is finished!  doing it by hand takes a little while but is worth it.  The frame has a few joints that I still need to get my hand in there to clean out. 

Hopefully the weather this next week stays agreeable to get to painting.  Matte Black Frame...Pearl white (848) Tank.