News:

This Forum is not for sale

 

help needed pppppppplease!!

Started by calscrazy, September 30, 2008, 05:11:31 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

calscrazy

September 30, 2008, 05:11:31 PM
anyone know the torque specs for the rear axle nuts on my 695? or is it "T" for tight?
home will always be between the red and rio!!!
2007 m695 errr recently passed away

♣ McKraut ♣

#1
September 30, 2008, 05:19:04 PM
Quote from: calscrazy on September 30, 2008, 05:11:31 PM
anyone know the torque specs for the rear axle nuts on my 695? or is it "T" for tight?

i think the torque specs on the SS were about 83Nm (22mm?).  the M750 was about the same.
2001 M600 Dark  2005 S2R Dark  2001 M750  1996 900 SS/SP  2005 S4R
-  Dallas, TX

bryant8

#2
September 30, 2008, 05:20:53 PM
Quote from: ♣ McKraut ♣ on September 30, 2008, 05:19:04 PM
i think the torque specs on the SS were about 83Nm (22mm?).  the M750 was about the same.

greased threads and  83Nm is what's been posted before in the tech section
2008 848
Mods: Full Termignoni Race Exhaust/ECU Tuned by AMS, Ducati Performance Dry Clutch Slipper Clutch, Öhlins steering damper
Next: Öhlins TTX shock and Öhlins fork internals, track body work
26.2 done 12/5/2010
70.3 by 10/12/2011
140.6 by 12/31/2012

♣ McKraut ♣

#3
September 30, 2008, 05:32:56 PM
yeah, don't forget the lube
2001 M600 Dark  2005 S2R Dark  2001 M750  1996 900 SS/SP  2005 S4R
-  Dallas, TX

Ronr

#4
September 30, 2008, 06:58:24 PM
Quote from: ♣ McKraut ♣ on September 30, 2008, 05:32:56 PM
yeah, don't forget the lube

That's what she said

pipeliner1978

#5
September 30, 2008, 07:00:57 PM
Quote from: Ronr link=topic= 12308.msg210887#msg210887 date=1222826304
That's what she said
very nice 8)

cdc

#6
September 30, 2008, 07:11:17 PM
Chris,

The following is lifted from the owner's manual of a 2007 Ducati Monster 695, page 50, last paragraph.  The section in the Manual was regarding "Tensioning the drive chain". 

Grease the thread of the axle nut (1) with SHELL
Retinax HDX2 and tighten to a torque of 72 Nm.
Grease the threads of the adjuster screws (2) with
SHELL Alvania R3 an tighten to a torque of 8 Nm.


If it is not in your Manual, download the pdf file from

http://www.ducati.com/en/bikes/service/manuals/2007.jhtml?family=manuals

cdc

♣ McKraut ♣

#7
September 30, 2008, 07:14:00 PM
or just tighten that pregnant dog up....i'm just sayin'.
2001 M600 Dark  2005 S2R Dark  2001 M750  1996 900 SS/SP  2005 S4R
-  Dallas, TX

calscrazy

#8
September 30, 2008, 08:28:46 PM
right side no prob. left side just spins along with axle. even if i put the right side back on the left side just spins. i think tomm i will try the old double nut trick. this is really startn to test my patience!!! [bang] [bang]
home will always be between the red and rio!!!
2007 m695 errr recently passed away

Duc L'Smart

#9
October 02, 2008, 01:22:28 PM
Any luck?!?
'07 1098s, '06 Paul Smart LE, '99 BMW K1200RS, '73 BMW R75/5, '67 Ducati Monza 250 Bevel Drive, '63 Vespa GS 160
Print
Go Up Pages1
User actions