News:

This Forum is not for sale

 

Pool of brake fluid on my floor

Started by Slag, November 24, 2008, 06:40:00 AM

Previous topic - Next topic

Slag

Are the front and rear brakes completely separate systems? My rear brake has died a horrible death. There is brake fluid on my garage floor, and the rear brake will not even keep the bike stopped on my driveway. I would rather ride it to the shop than trailer. The front brake seems fine. Am I safe to do so?


svoloch

if it's leaking brake fluid still, I'd just be worried about sliding your tire in it.  Other than that, as I'm sure you know, the rear brakes are a fashion statement on the ducati, not a functional piece of hardware.

Тише едешь, дальше будешь
2009 Streetfighter S
exes:
2006 Sh1t Hot Black Xerox 999     1973 BMW R75/5
2001 BMW K1200RS                     1994 BMW R1100S
1974 Guzzi T3                              1975 BMW R90/6
1975 BMW R90/S                         1973 Suzuki T500

pipeliner1978

didnt we already have this conversation?


Slag

Good point on the back tire. I will trailer.

caffeinejunkee

+1 what Svoloch said.

During the spring HC trip, Ron had to go on just front brake after his rear had a melt down of sorts.  :P

Slag

I rarely use my back brake. I was just concerned with it affecting the function of my front. I now remember Tommy pointing out that they were separate systems.

pipeliner1978

Quote from: Slag on November 24, 2008, 06:46:31 AM
Good point on the back tire. I will trailer.
did you buy it to trailer it, or did you buy it to ride?  f#ck it, i'll ride it there, just pick me up......if not i'll be coming home on a PS (I'm just sayin)

fastwin

Quote from: The Svoloch on November 24, 2008, 06:43:09 AM
if it's leaking brake fluid still, I'd just be worried about sliding your tire in it.  Other than that, as I'm sure you know, the rear brakes are a fashion statement on the ducati, not a functional piece of hardware.



Trailer it Zach. I'm with Patrick, you don't want brake fluid on the rear tire... bad juju. Probably a loose banjo bolt or loose reservoir cover. I also agree that they are for looks only. My 999 rear brake is just there for proper weight balance. The stock pads must be made from kryptonite. I have some SBS pads and seriously need to swap those out. Check those banjo bolts and res cover. Haven't ever seen too many calipers puke fluid. Please don't ride it until you figure it out. [thumbsup]

Slag

Thanks B! that is the plan. I would really hate to go down over something like that  [bang]

Duc L'Smart

'07 1098s, '06 Paul Smart LE, '99 BMW K1200RS, '73 BMW R75/5, '67 Ducati Monza 250 Bevel Drive, '63 Vespa GS 160

webspoke

On my S2R and the HM, the rear brakes were almost worthless until properly bled. The caliper location (under the axle) line routing and bleeder location conspire to create big air pockets that cannot be bled out... unless you unbolt the caliper, and elevate it to get the bleeder as the high point back there.  Had to insert a piece of steel to mimic the rotor into the caliper to keep the pads/pistons from popping out while bleeding.   They still feel only about 50% as effective as my wife's Buell lightning. 
Streetfighter 1098S

BarneePhife

Quote from: Slag on November 24, 2008, 06:40:00 AM
Are the front and rear brakes completely separate systems? My rear brake has died a horrible death. There is brake fluid on my garage floor, and the rear brake will not even keep the bike stopped on my driveway. I would rather ride it to the shop than trailer. The front brake seems fine. Am I safe to do so?

Not that I can offer any assistance, but just out of curiosity - which bike are you talking about?   You've only got 3.

Is this a moto-related thread?  OMG!  Quick - someone give Slag a drink.  What was he thinking?!

  • 2006 Ducati SportClassic 1000
  • 1978 Yamaha GT 80

Ambition is a poor excuse for not having sense enough to be lazy.

TresGatos

if not i'll be coming home on a PS (I'm just sayin)
[/quote]

If u do, let me know, I'll ride over 2day.
'65 Honda CM91 - '98 Suzuki DR650 - '08 695+mods - '08 Hypermotard 1100S