Anyone get the CRG Bar Ends (w/ mirror adaptor) to fit on Tomaselli clip-ons?  If so, How?

The bars are stepped inside, and the wedges are just catching the stepped area not getting good grip on anything.

Moving the controls will be too much effort since the bars are drilled.

Soon as everyone wakes up, I'm gonna put power tool to the b!tche$.

Mine are just clamped to the bar.  No adaptors.  Sorry.

+1, you cannot fit barends to these guys they need to be clamped on.

Thanks guys.

I'm gonna chop off about 1/4" from the wedges and spacer to see if i can get them to fit. 

Quote from: DarkStaR on December 20, 2008, 08:33:49 AM
I'm gonna chop off about 1/4" from the wedges and spacer to see if i can get them to fit. 

That didn't work! 

Bore the end of the clip-on maybe?!?  I dunno as I usually just clamp the mirrors onto the ends of the bars.  Best of luck though. 

Tig weld.

Ended up chopping off the whole CRG wedge mount, and used a cheapo rubber crush style mount.

Now you'll finally be able to see the red & blues flashing from behind when we're on the freeway.