News:

Welcome to the DMF

 

Termi decal removal??

Started by lpcassie, January 19, 2009, 07:51:12 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lpcassie

January 19, 2009, 07:51:12 PM
Anybody know a SAFE way to remove the Termignoni decals off my carbon fiber cans??  [bang]

mmakay

#1
January 19, 2009, 08:13:32 PM
Mine pealed off very easily with no residue.  They were still practically new at the time, though, so they didn't have a chance to bake on.
- Mickey

red baron

#2
January 19, 2009, 09:15:39 PM
plastic putty knife/bondo spreader and some 3M 8984 adhesive remover.
"I believe there are more instances of the abridgment of freedom of the people by gradual and silent encroachments of those in power than by violent and sudden usurpations... James Madison

kopfjäger

#3
January 19, 2009, 09:45:29 PM
If the pipes aren't new, use a blow dryer to warm them up alittle and they will peel right off.
“Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the frickin\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

MrFryMoto

#4
January 19, 2009, 10:33:56 PM
peeled mine off with a few thousand miles on them - used Goo-Gone to get rid of the residue.

mine were aluminum cans though...
MrFry's News Ticker:
*shifty eyes* someone's been reporting bad news-->Fry-Cycles to offer baked, broiled & deep fried options as well .....My Little Pony still in style.....House NOT destroyed in motorcycle gang's takeover!.....DMF: where the cool kids hang out........

mmakay

#5
January 20, 2009, 08:20:31 AM
Goo-Gone or any other chemical is a good way to damage carbon fiber if you aren't very careful.  Use with extreme caution if you choose to use them at all.
- Mickey

mrplease

#6
January 20, 2009, 08:27:41 AM
peeled mine off and bought some new carbon fiber ones...




Slide Panda

#7
January 20, 2009, 11:27:10 AM
Yeah they will peel off w/o much hassle actually.  But! if they have been on there a long time, the carbon under the sticker will look nicer than the rest.  If you're doing this to new, or pretty new - no worries.  But I peeled the stickers off my 4 y/o cans ane there was a notable difference.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Heath

#8
January 20, 2009, 02:41:03 PM
Hair dryer!
2007 Ducati Monster S4RT
2006 Ducati Monster S2R800 Dark [sold]
Print
Go Up Pages1
User actions