I took some pictures today of my bike with all the mods I've made in the last year.

So far:

-Rizoma Blinkers.
-Rizoma Oil cap.
-Speedymoto sprocket cover.
-Speedymoto clutch cover.
-Speedymoto SS springs and caps.
-Speedymoto crack shaft cover.
-Tail chop.
-Pazzo short levers.
-696 headlight.
-Diversion Carbon Fiber front fender.
-CRG Blindsight bar end mirrors.
-Termi shorty exhaust.
-Ducati performace Carbon Fiber belt covers.


I wish i could say I am done but I am sure I will end up doing the speedymoto top triple and clip ons along with Rizoma rear sets. As you'll see, new tires are due soon too. Hope you like it.

Nice work   Can you post a closeup of how you mounted the rear Rizoma's



No go out a make some nice turns & even out that rear tire.......it's going square on ya

You're a brave man keeping the bike upright like that 

It must not be windy where you live..

wow! how wide is that rear tire?

i think some michelin pilot power tires would look awsome as your next set of tires!

Quote from: Gus Duc on March 27, 2009, 10:40:30 PM
Nice work   Can you post a closeup of how you mounted the rear Rizoma's



No go out a make some nice turns & even out that rear tire.......it's going square on ya

Thanks. I modified a Competition Werkes tail chop kit. i will try to get a picture tomorrow. Are you kidding? They are already squared! I live downtown DC and ride to work pretty often. Sadly, not many curves in the city.

Quote from: EEL on March 27, 2009, 10:51:28 PM
You're a brave man keeping the bike upright like that 

It must not be windy where you live..

It was pretty risky, but also I took the shot so that it would look more upright than it really was.

Quote from: mrplease on March 27, 2009, 11:08:48 PM
wow! how wide is that rear tire?

i think some michelin pilot power tires would look awsome as your next set of tires!

It's the standard 180, but i took the shot with a very wide angle (18mm) Leica lens and that distorts the image a bit when up close. The Pilot Powers are one of my top options. Hopefully next week i'll do the switch.

Looks really nice!

Which Rizoma blinkers?

Try removing the passenger pegs - sorta look like cruiser crash bars the way they stick out.

That 696 headlight looks awesome (although I'd paint the bracket and cross-piece black).  How difficult was it to mount?

The blinkers are the Rizoma Track 01. Apparently they were discontinued and only in the market for about a year. I wish I could take the passenger pegs off, but I do used them from time to time to the girl there. I could see a comment from her  coming my way just from taking them off

By the way, do you know of any rear pegs for the s2r that do not protrude? Since I run the shorty I don't really need the right side to stick out.

Quote from: biffborax on March 28, 2009, 04:37:27 AM
Looks really nice!

Which Rizoma blinkers?

Try removing the passenger pegs - sorta look like cruiser crash bars the way they stick out.

Quote from: jftoha on March 28, 2009, 12:53:31 PM

By the way, do you know of any rear pegs for the s2r that do not protrude? Since I run the shorty I don't really need the right side to stick out.

The only ones I know of that are a stock Ducati piece and bolt right on (kinda...) are off of a 1999 - 2007 SS.  They don't have the stepped flange like yours, so you'll have to space out one of the bolts, but they share the same mounting bolt dimension.  Don't know how far down they will stick so that could be an issue.  Also, since they're also designed to hold the muffler in place, they have a cast-in 'O' near the bottom that would need to ground/polished off.

Thanks a lot, I will look those up.

Quote from: Duck-Stew on March 28, 2009, 01:01:31 PM
The only ones I know of that are a stock Ducati piece and bolt right on (kinda...) are off of a 1999 - 2007 SS.  They don't have the stepped flange like yours, so you'll have to space out one of the bolts, but they share the same mounting bolt dimension.  Don't know how far down they will stick so that could be an issue.  Also, since they're also designed to hold the muffler in place, they have a cast-in 'O' near the bottom that would need to ground/polished off.

 
Very nice. I usually don't like the way shorties look on any bike but it looks really good on your bike.

bike looks great.

when I saw the title I thought the DMF moderator team got together yet again for a party without telling me.   

Quote from: Statler on March 29, 2009, 07:10:04 AM
bike looks great.

when I saw the title I thought the DMF moderator team got together yet again for a party without telling me.   

What? We'd never do that.

Quick stu', delete those threads before he sees!

Nice modifications! Very clean 

Quote from: Drunken Monkey on March 29, 2009, 02:38:50 PM
What? We'd never do that.

Quick stu', delete those threads before he sees!

Nice modifications! Very clean 

I'm on it! 

Quote from: Drunken Monkey on March 29, 2009, 02:38:50 PM
What? We'd never do that.

Quick stu', delete those threads before he sees!

Nice modifications! Very clean 

Who are you kidding?

We'd do it in a heartbeat.