Wow, all these for $24.99 + $6.00 shipping? 

UPDATE: with sarcasim!

http://cgi.ebay.com/ebaymotors/TPO-Ducati-Monster-Emissions-Removal-Mod-Kit_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a10Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem300310173499QQitemZ300310173499QQptZMotorcyclesQ5fPartsQ5fAccessories

I spent less than $3 doing mine...

I was being sarcastic.  I think I spent $5 when I took mine out.

I know. But there are too many people who have bought kits like this from TPO when they could have done it for pocket change...

Quote from: NAKID on April 23, 2009, 06:55:36 PM
I know. But there are too many people who have bought kits like this from TPO when they could have done it for pocket change...

or less with a good collection of spare bolts and a little patience

I used the existing hose from the canister, a "y" connector from Checker Auto Parts, and 2 vacuum caps. It was somewhere in the neighborhood of $3...

Quote from: NAKID on April 23, 2009, 08:13:31 PM
I used the existing hose from the canister, a "y" connector from Checker Auto Parts, and 2 vacuum caps. It was somewhere in the neighborhood of $3...

I got the vacuum caps from NAPA.  My caps are showing signs of drying out and cracking lately.  they've only been on there for ~2k miles.  Keep forgetting to stop by there and get replacements.

I simply replaced the spigots with bolts and yanked everything out. Cost= 20 cents

2 bolts from Home Depot: $2
liquid gasket seal: $3
DIY: Priceles!

I think I am going to be taking a trip to home depot soon.

Quote from: Goat_Herder on April 23, 2009, 10:49:54 PM
2 bolts from Home Depot: $2
liquid gasket seal: $3
DIY: Priceles!

696 just takes two rubber vacuum nipple caps. that's it. box of a dozen cost somewhere in the neighborhood of 50¢... sure it takes all that?

Okay so I have everything off. The M5 bolts I have (smallest ones I could find) still are way longer than the end of the nipple that screwed in... Could I space it out with a washer of sorts or should i go find the smaller ones. Or is it fine that they go in further? Thanks for the help.

Quote from: flanman on April 26, 2009, 12:19:21 PM
Okay so I have everything off. The M5 bolts I have (smallest ones I could find) still are way longer than the end of the nipple that screwed in... Could I space it out with a washer of sorts or should i go find the smaller ones. Or is it fine that they go in further? Thanks for the help.

Yah, the M5 bolts I found at Home Depot are way too long.  A little Dremel action took care of that.  I also applied liquid gasket to the bolt to seal it. 

Alright great. I picked up some smaller ones and have some high temp gasket stuff. Very easy and simple mod it's a wonder anyone would spend that money for the TPO kit.