Seems like they are only available on the Ti versions.  Can someone confirm this?  Can you use a Ti DB killer in a CF can anyway?

Thanks!

For which bike?

This might help you out, it doesn't address you question specifically, but I see CF termis, getting baffled in there.

http://ducatimonsterforum.org/index.php?topic=24498.15

my Ti arrows never came w/baffles, and I don't see any sort of way to fit some in (no holes for screws, or grooves for c-clips.... nothin')

I have carbon Arrows that came with removable DB killers.

Quote from: Armor on June 11, 2009, 09:37:24 AM
I HAD carbon Arrows that came with removable DB killers.

ditto

I've installed a set of endcaps with dB-killers in a set of carbon Arrows cans.

My carbon Termis came with baffles in the box as well.

thanks.  must only list the part under the Ti b/c they are the same.  Appreciate the help.

Quote from: Speeddog on June 11, 2009, 09:48:21 AM
I've installed a set of endcaps with dB-killers in a set of carbon Arrows cans.

which end caps?

I was thinking of looking into some sort of way to baffle my cans, in case I decide to pull commute duty on the monster, and I'd hate to piss off the new neighbors

Here is e-mail exchange with Greg Centuori from Arrow.

QuoteRe: 2004 Ducati S4R CF Arrow End Caps with BafflesTuesday, April 28, 2009 11:01 AM
From: "Greg Centuori" <info@arrowexhaust.com>Add sender to Contacts
To: "Boris ...." <haloguy.....com>
Boris,

     Thanks for your purchase of Arrow exhaust for your Ducati.  I can
assist you with your request.  The homologation kit for your silencers costs
$219.00 plus shipping.  Let me know if you have any further questions or if
you would like to order a kit.

Best Regards,

Greg Centuori
Arrow Exhaust, USA

----- Original Message -----
From: "Boris ...." <haloguy......com>
To: <info@arrowexhaust.com>
Sent: Tuesday, April 28, 2009 9:54 AM
Subject: 2004 Ducati S4R CF Arrow End Caps with Baffles


> Hi Greg,
>
>
>
> I have 2004 Ducati Monster S4R with Carbon Fiber Arrow exhaust installed
> that is getting too loud for me (49 years old and getting older every day
> :-). I would like to get new end caps that have the clips for the baffles
> and install it on my pipes so I can have quieter pipes for everyday riding
> with option to take the baffles out while on track. I found your e-mail on
> Ducati Monster List and was told that you can facilitate my request.
>
>
>
> Thanks
>
>
>
> Boris

Seems that some of the Arrows, especially the Ti cans, came with the end caps that have the grove that allows you to run baffles.  My carbons didn't so I purchased a set of the above mentioned endcaps & baffles from Greg @ Arrow USA but I never got around to installing them.  I know another member here did so on his S4rt & he claims to have gained some bottom end as well.  They seem very restrictive but you can always drill some extra holes or just take them out.

I am sorry to revive this ancient threat.  I recently purchased an s2r 1000 with FBF full carbon exhaust, which I was told is re-badged Arrow.  I am looking for db killers due to noise issue.  Does anyone still have the db killers and/or the endcaps?

Anyone knows how effective are the killers?  Right now I am setting off alarms and waking neighbors.

You can buy the DB killers from Arrow.  My local Arrow agent quoted me about $60 for a pair.  They must come with the circlips.

slowkitty,  I've contacted Arrow.it directly and they refer me to their US representative who quoted me 80 USD per pair.  It is good to know that I could get them cheaper.  Do you mind telling me which dealer did you get that quote from?  Some of the posters have said that I need the slotted end cap for the db killers to stay in.  Have you done it with out changing the end cap?  Can you describe the process?