Rick, we still on?  I'm about to go take Darmah to the vet, but should be done by noon.

Quote from: DRKWNG on December 06, 2008, 10:53:22 AM
Rick, we still on?  I'm about to go take Darmah to the vet, but should be done by noon.

you'd better be!  [shakes fist]

Quote from: DRKWNG on December 06, 2008, 10:53:22 AM
Rick, we still on?  I'm about to go take Darmah to the vet, but should be done by noon.

We're on. I'm at the shop now.

mine back is still on the fritz.  i'm not going to be able to ride down today.  mebbee i can have the wife drop me off.

Rick, we still on for tomorrow morning, around elevenish?  I can do earlier if that is better for you, just let me know.

It's funny that the above post is almost the same post as the top of the page.    We're on. 10:30 to 11:00 on.

Quote from: mac900 on January 02, 2009, 10:46:50 PM
It's funny that the above post is almost the same post as the top of the page.    We're on. 10:30 to 11:00 on.

Yep, reliving my past. 

Ok, resurrecting this old post because it has become pertinent again. 

Rick, what time should we look at starting this undertaking on Friday?  Assuming Friday is still good. 

We can start about 9 or 10 if you want. You bring the SC. I'll bring the 240D. That way if we don't finish for some reason I can give you a ride home and we'll finish up on Sat. How's that? I'm not taking the 848 in on Friday as Will is doing warranty work on outer islands. Phooey!

I haven't looked inside the front axle box for a while so besides the axle and the end nut did you get all the spacers and washers that go along with the axle when fitting a wheel?

There was one small washer that came with the lock nut, but that is the only one that I saw. What other spacers would be needed? Did you take a look at the wheel itself? Did it look like it had the right spacers?

The wheel has spacers. I guess we'll see if everything is the right set up. All the parts I have are at the shop now.

Cool, thanks man. I'm going to rent a pickup in a bit to move some big things around, and will bring the brakes down to the shop when I head out. And az far as those spacers go; they had better be the right ones, or I will be sending Ed at motowheels some anthrax.

ah.

So Rick, did your parts come in?