QuoteLooks like SOLOMONster beat me to the punch. I just found his bike posted on the "Bikes of the DMF" thread

I wouldn't call myself impartial, but I like the look of SOLOMONster's bike, if only he had the scrilla to ceramic coat those megaphones matte black... 

HAHA, nice.

How much dinero do you think youll need to powder coat them?

I actually haven't looked into it much, what with finding other ways to spend money and the bike, and a bit too much of this    Any idea what might be a fair price?  I just want to coat the megaphones, not the headers or the small reverse cones.

if you bring them the parts the whole exhaust should be >200$. make sure they do the double coat procedure. ask about coating the inside as well as that is going to give you a better performance gains than the outside.  it wont be a huuuge difference but it is a good idea while its all being done.

I think he means ceramic coating

I was talking about ceramic coating. we did some for an 848 external coat only and I believe it was ~200$ not including removal/re-fitting.

That was my rookie mistake, I called it Powder Coating, but deleted the thread out of embarrassment.

Has anyone tried to put a sport classic exhaust on their monster?

Can you get a ceramic coat on stainless steel?

i.e on the marving cat. eliminator pipes

Quote from: Hank025 on January 26, 2011, 11:59:11 AM
Can you get a ceramic coat on stainless steel?

i.e on the marving cat. eliminator pipes

I'm almost sure you can. Lots of members have done it.
Search _ceramic coating_ here and you'll find out more....

Quote from: m1moto on January 20, 2011, 12:49:46 PM
A rough photo-chop, CompWerkes cans on Arrows headers

We are actually working on this exact set up on my S4R right now!

Pics to come soon.

Quote from: BellissiMoto on January 28, 2011, 04:27:51 PM
We are actually working on this exact set up on my S4R right now!

Pics to come soon.

What are the chances of getting it to work for an 08' S2R 1K???

Quote from: scduc on January 28, 2011, 05:07:40 PM
What are the chances of getting it to work for an 08' S2R 1K???

Should be pretty good actually.

I'll keep you guys posted   

awesome!

I really think the S2R 1K is the least supported of all the monsters in terms aftermarket parts... especially exhausts

Quote from: Hank025 on January 29, 2011, 07:16:03 AM
awesome!

I really think the S2R 1K is the least supported of all the monsters in terms aftermarket parts... especially exhausts

Yeah, I think your right. There are some options, but the confusion of the S4R, S2R 1K and S2R 800 and the compatibility of the model year is really frustrating. I really like the look of the CompWerks cans and it would be great if I could get those cans in the left and right configuration. The short and stubby look resembles that of the MotoGP bikes. I know its photo chopped, but I really like the line. The way the manifold shoots up and then the pipe follows the line of the frame. Most manufactures don't do a real good job of following the line, and I have yet to see a factory pipe tucked nice and tight to the frame.

I have been looking around and cannot find a clip of the competition werkes full system on an s2r800... only s4rs...  so its not an accurate gauge of what I would get... really like the look of it though