News:

This Forum is not for sale

 

Bianca aka. my take on the 2V SBK

Started by The Mad King Pepe', March 06, 2011, 08:32:32 AM

Previous topic - Next topic
Print
Go Down Pages 1 ... 6 7 8 9 10 ... 17
User actions

The Mad King Pepe'

#105
July 27, 2011, 08:07:17 PM
Made this bracket out of a sheet of aluminium. It bolts down on the frame and the pint on the front of the gas tank goes into the hole.


Right now I placed the battery (Shorai 14) behind the steering hub, tho this might not be its final position.


Looks pretty clean from the side [thumbsup]


Forks (thanks Yosso), front wheel, risers and handle bars are finally on. Still waiting on the rotors and the spacer for the front axle.


I'm loving the way it's coming along [thumbsup]






First they came for the Socialists, and I did not speak out-- Because I was not a Socialist.
Then they came for the Trade Unionists, and I did not speak out-- Because I was not a Trade Unionist.
Then they came for the Jews, and I did not speak out-- Because I was not a Jew.
Then they came for me--and there was no one left to speak for me.

DRKWNG

#106
July 27, 2011, 08:14:54 PM
Not going with clip ons? Don't know why, but I thought you were...
And the sugar fountain fairy swore so hard when she came to super-size that stale hope soybean; liiiike a homeless German woman. Who is this super-sizing spirit-crushing femme? And tell her I'll break a tree root up in her shrimp.

Being faster than you thought possible…it feels good. No, screw thatâ€"it feels like shotgunning a gallon of adrenaline and chasing it with an all-night orgy aboard a burning Viking boat.

2-Skinny

#107
July 27, 2011, 08:48:02 PM
No S2R swingarm...?
I don't own a Ducati...but I wrench on one.

zooom

#108
July 28, 2011, 04:31:27 AM
Quote from: DRKWNG on July 27, 2011, 08:14:54 PM
Not going with clip ons? Don't know why, but I thought you were...

I expect to see the clip on clamps without the handlebar tubes on the forks below the triple for easier conversion for when he takes it to the track...pops the controls off the handlebar and onto clip on bars, slides into place, and takes the handle bar off...done in 20 mins! (unless he has had a beer or few beforehand)
99 Cagiva Gran Canyon-"FOR SALE", PM for details.
98 Monster 900(trackpregnant dog-soon to be made my Fiancee's upgrade streetbike)
2010 KTM 990 SM-T

The Mad King Pepe'

#109
July 28, 2011, 05:35:33 AM
Quote from: DRKWNG on July 27, 2011, 08:14:54 PM
Not going with clip ons? Don't know why, but I thought you were...
Nope not a chance, at least on the street, my wrists would kill me.  :'(

Quote from: 2-Skinny on July 27, 2011, 08:48:02 PM
No S2R swingarm...?
Nope not a chance. ;D I'm using a SBK frame, so it make more sense to use a SBK swingarm. Fitting the S2r / S4r swingarms would require cutting off the lower part of the frame and I would also have to figure out where to move the pegs and which kind to use...

Quote from: zooom on July 28, 2011, 04:31:27 AM
I expect to see the clip on clamps without the handlebar tubes on the forks below the triple for easier conversion for when he takes it to the track...pops the controls off the handlebar and onto clip on bars, slides into place, and takes the handle bar off...done in 20 mins! (unless he has had a beer or few beforehand)
I'm looking for some 748 / 996 2-piece clipons so I wouldn't have to take off the top triple, but I'm not in a rush to get that done.
First they came for the Socialists, and I did not speak out-- Because I was not a Socialist.
Then they came for the Trade Unionists, and I did not speak out-- Because I was not a Trade Unionist.
Then they came for the Jews, and I did not speak out-- Because I was not a Jew.
Then they came for me--and there was no one left to speak for me.

zooom

#110
July 28, 2011, 06:12:55 AM
Quote from: The Mad King Pepe' on July 28, 2011, 05:35:33 AM
I'm looking for some 748 / 996 2-piece clipons so I wouldn't have to take off the top triple, but I'm not in a rush to get that done.

any standard clip-on bracket can be installed at this stage and be positionable where it interferes with nothing...when ready...you can simply insert the handlebar tube and tighten it down and be done, pretty much just as I suggested above...
99 Cagiva Gran Canyon-"FOR SALE", PM for details.
98 Monster 900(trackpregnant dog-soon to be made my Fiancee's upgrade streetbike)
2010 KTM 990 SM-T

The Mad King Pepe'

#111
July 28, 2011, 06:21:28 AM
Quote from: zooom on July 28, 2011, 06:12:55 AM
any standard clip-on bracket can be installed at this stage and be positionable where it interferes with nothing...when ready...you can simply insert the handlebar tube and tighten it down and be done, pretty much just as I suggested above...

Dos Equis: The Most Interesting Man in the World on Rollerblading
First they came for the Socialists, and I did not speak out-- Because I was not a Socialist.
Then they came for the Trade Unionists, and I did not speak out-- Because I was not a Trade Unionist.
Then they came for the Jews, and I did not speak out-- Because I was not a Jew.
Then they came for me--and there was no one left to speak for me.

Buckethead

#112
July 28, 2011, 09:35:58 AM
Quote from: The Mad King Pepe' on July 28, 2011, 05:35:33 AM
I'm looking for some 748 / 996 2-piece clipons so I wouldn't have to take off the top triple, but I'm not in a rush to get that done.

50 or 53 mm?
Quote from: Jester on April 11, 2013, 07:29:35 AM
I can't wait until Marquez gets on his level and makes Jorge trip on his tampon string. 

Artful

#113
July 28, 2011, 09:38:47 AM
53mm.
Every time I meet a new group of your friends that understand you and your weird sense of humor I'm a little more amazed that there are other people in the world like you that lived through childhood - My loving girlfriend

Buckethead

#114
July 28, 2011, 09:57:38 AM
Like so?

Quote from: Jester on April 11, 2013, 07:29:35 AM
I can't wait until Marquez gets on his level and makes Jorge trip on his tampon string. 

Raux

#115
July 28, 2011, 01:18:35 PM
woodcraft has the 2-piece mount.

The Mad King Pepe'

#116
July 28, 2011, 02:18:11 PM Last Edit: July 28, 2011, 02:20:42 PM by The Mad King Pepe'
Does anyone know where to get quick disconnects for SBK tanks? I think I might have seen them on the more recent bikes but I'm not sure... If possible I'd like to get one to fit a M10x1.25mm

Quote from: Raux on July 28, 2011, 01:18:35 PM
woodcraft has the 2-piece mount.
Thanks I'll keep that in mind when I start shopping.

Quote from: Buckethead on July 28, 2011, 09:57:38 AM
Like so?


Exactomundo! ;D

First they came for the Socialists, and I did not speak out-- Because I was not a Socialist.
Then they came for the Trade Unionists, and I did not speak out-- Because I was not a Trade Unionist.
Then they came for the Jews, and I did not speak out-- Because I was not a Jew.
Then they came for me--and there was no one left to speak for me.

Raux

#117
July 28, 2011, 02:26:30 PM
Quote from: The Mad King Pepe' on July 28, 2011, 02:18:11 PM
Does anyone know where to get quick disconnects for SBK tanks? I think I might have seen them on the more recent bikes but I'm not sure... If possible I'd like to get one to fit a M10x1.25mm



are you talking fuel line? there are brass one's available. I think motowheels http://www.motowheels.com/italian/myProducts.cfm?parentcategoryid=1054%7CMonster%20Engine%20%26%20Performance&productID=3492&showDetail=1&categoryID=1079

The Mad King Pepe'

#118
July 28, 2011, 02:37:33 PM
Quote from: Raux on July 28, 2011, 02:26:30 PM
are you talking fuel line? there are brass one's available. I think motowheels http://www.motowheels.com/italian/myProducts.cfm?parentcategoryid=1054%7CMonster%20Engine%20%26%20Performance&productID=3492&showDetail=1&categoryID=1079
like those: metal disconnects or quick releases! thanks. [thumbsup]
First they came for the Socialists, and I did not speak out-- Because I was not a Socialist.
Then they came for the Trade Unionists, and I did not speak out-- Because I was not a Trade Unionist.
Then they came for the Jews, and I did not speak out-- Because I was not a Jew.
Then they came for me--and there was no one left to speak for me.

Buckethead

#119
July 28, 2011, 02:43:28 PM
Quote from: The Mad King Pepe' on July 28, 2011, 02:18:11 PM
Exactomundo! ;D

PM me your shipping address.
Quote from: Jester on April 11, 2013, 07:29:35 AM
I can't wait until Marquez gets on his level and makes Jorge trip on his tampon string. 
Print
Go Up Pages 1 ... 6 7 8 9 10 ... 17
User actions