News:

Welcome to the DMF

 

GoPro helmet cam

Started by Dockstrada, August 13, 2011, 10:39:52 PM

Previous topic - Next topic

Bazz21

back when we were all playing with cameras two position were the best behind the screen and facing back wards on the passengers seat with an external mick taped besides the cans ,  two cameras running at once worked  even better showing following bike lean angles and over taking and some with a little editing cheers bazz
MAX SAYS MORE WOOM WOOMS

cabron

Warning - GOPRO Users....

Yes, I know this is a custom mount, however I removed camera this morning only to find the plastic case has cracked right along the mount/pivot point where it reaches the camera housing. Only 1 side was broken through completely, and the other has stress cracks through the plastic, and it wouldn't take much to break off and lose the camera completely. I was worried that the mount was too rigid, and vibration may cause issues with the camera, however I didn't expect this.

Glued back together with Loctite 406, and I became part of the assembly for a minute or two.....now sporting Superglue finger

Just something to watch out for........Bugger, running off to get a new housing now as don't trust this one on the front of the surfboard anymore......



buck243

Can anyone tell me the simplest editing program to use with the GoPro ????



dan_t

Honestly? I just use the Windows Live Movie Maker. Free with Windows. you can dowload it easy enough.
'08 S4rs;
Termis, DP C/F Short Tail, DP C/F Rear Hugger, Custom hand-made seat, Matris Steering damper, Pazzo Shorty Levers, Rizoma Dynamic mirrors, EVR Ventilated Pressure Plate, EVR Open Clutch Cover, SpeedyMoto Stainless Springs Kit, EVR Clutch Slave Cylinder, EVR Front Sprocket Cover, Evotech Performance Radiator & Oil Cooler Guards, Rizoma CT027R, CT017R & CT015R red fluid reservoirs, Powder Coated Rear Passenger Pegs, Oberon Racing Pegs, C/F Fairing stays, Oggy Knobs, ZG tinted Screen

Sundog

Yeah, that's what I used as well, I just downloaded it from MS and away I went. The YT video below was edited with it from 5 separate clips, then I matched the soundtrack and the cutaways and that was it. Took me about 30-45m. 
M1100 2010 in Ducati Titanium Grey
Custom Wizard Sleeve pipes & PC5 with O2 opt
14T Front
DP Anodized Pressure Plate DP Tail Chop
DP LED Indicators               Rizoma Rearset & Mirrors
Oggie Sliders                     Rizoma Bars & Levers

lawmaster891

id really like to get one of these for my next big trip