I wanted something smaller, showing more frame. Actually I'd prefer plastic, but it's so much easier to cut into carbon so Jeff at MonsterParts sold me a pair of Carbonworld covers (along with a few other items....)

Tape them up, draw a pencil line, Dremel'ish cutting wheel, grind/sand, silicone mesh in place... finished.
(hoping the clear coat won't start going rough on the edges, in which case I'll hand coat them with epoxy)

Nice neat job.  Looks very cool 

IZ will be so proud of you too  .

Quote from: ungeheuer on November 02, 2011, 12:51:39 PM
Nice neat job.  Looks very cool 

IZ will be so proud of you too  .

It's my pay it forward to him, so he won't feel lonely.

Thanks!

Quote from: ungeheuer on November 02, 2011, 12:51:39 PM
IZ will be so proud of you too  .

What does this have to do with the Pipe Mod?

Looks cool.  I did my stock belt covers that way a couple of years back.  Good job.

Quote from: Bick on November 02, 2011, 01:21:48 PM
What does this have to do with the Pipe Mod?

The IZ_ pictures?

Quote from: Nomad on November 03, 2011, 10:41:31 PM
The IZ_ pictures?

if only the pipemod had been blurred out...

nice dremel work, btw 

Quote from: teddy037.3 on November 05, 2011, 02:50:33 PM
if only the pipemod had been blurred out...

nice dremel work, btw 

Thanks!

The pipe ugliness isn't as bad live, but still not pretty
I've been through countless options, but nothing I've seen allows my feet this close to the pipes....
Custom CF instead of the rusty mesh maybe?

Quote from: stopintime on November 05, 2011, 03:34:30 PM
Thanks!

The pipe ugliness isn't as bad live, but still not pretty
I've been through countless options, but nothing I've seen allows my feet this close to the pipes....
Custom CF instead of the rusty mesh maybe?

I didn't mean your pipes... I meant AZ's pipemod *shudder*

can't recall where off the top of my head, but I know I've seen universal CF heat shields for pipes, they're the rectangular kind, with hose clamp looking things to fasten them to the pipe

Quote from: teddy037.3 on November 05, 2011, 03:47:17 PM
I didn't mean your pipes... I meant AZ's pipemod *shudder*

can't recall where off the top of my head, but I know I've seen universal CF heat shields for pipes, they're the rectangular kind, with hose clamp looking things to fasten them to the pipe

Seen them, but still a lot wider from the pipes + I'd need a curved one for the lower s-pipe.

looks great. i went with no side panels a while ago, but this is very stylish.

did you think about doing the same thing with the belt covers?

Quote from: hunduc on November 05, 2011, 04:21:12 PM
looks great. i went with no side panels a while ago, but this is very stylish.

did you think about doing the same thing with the belt covers?

Yes - those are next  Probably not the mesh though - I won't risk the mesh coming off.

so what's the plan? lexan windows maybe?

Quote from: hunduc on November 05, 2011, 04:36:59 PM
so what's the plan? lexan windows maybe?

Just plain open is my plan for now......

you saw that new thread in "general monster forum", right?