anyone got pics of bellypan fittings?

[monsta]

I've just bought a bellypan(It looks like one of the monza ones), but it didn't come with the brackets for mounting it.
I plan on making them and wondered if anyone got pics of how its fitted, or better... the brackets themselves to make life easier?

 

[COWBOY]

what brackets?  there are a couple of extenders on the front but mine was pretty much plug and play (did take some working to get it to line up properly, it's a snug fit and will take time to find the right fitment).

[monsta]

from the position of the holes in the bellypan, it looks like it mounts from screws that hold the inner clutch cover and alternator cover on (2 on each side).
Although, it looks like I need spacers to fit in the counterbore of the covers (like the one thats on the screw that holds the starter power lead and stops it flaping about) and brackets from there to the bellypan??? 
This is all guesswork because from all the pics I've seen on the intaweb of bellypans, I cant see how their mounted.

[COWBOY]

the only two that I had to use the included attachments on are those upfront.  They are also the two that are not exposed at all so remember to locktite them before you finish up otherwise you'll have to take the whole thing off to do it.  everything else lined up there are no spacers if memory serves.  I'll have another look tomorrow and let you know.

[scooby]

This is a pic off of www.redracingparts.com where I got mine (years ago...).

[stopintime]

Mine is S2R - I don't know how this translates into yours. All four points are clamped with what was in the kit. I got mine from MonsterParts - he has the clamp kit. A spacer had to be added on the rear right side clamp, otherwise no fitment issues.

[monsta]

that exactly what I was looking for!   
seems I was close with my guess.  I have the bits partly made and they look fairly close to the pics.

Thanks fella's   

[NekkedChic]

Anyone finding belly pans for 08/09 696 yet?   

[Capo]

The kit consists of 4 sets of these


The holes are 35mm centers and the strip is 13mm wide. The fixing at the top is a 6mm 'nutsert'.

[rosstermyer]

Anyone finding belly pans for 08/09 696 yet?   

http://www.barracudamoto.it/DettaglioProdotto.aspx?IDP=1114&CAT=62

[monsta]

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=350092359885&ssPageName=STRK:MEWA:IT&ih=022

this is where I got the bellypan..
nice, well made part....   

[NekkedChic]

http://www.barracudamoto.it/DettaglioProdotto.aspx?IDP=1114&CAT=62

KEWL-wow and THANKS, also to Monsta....but Monsta, is this link for new 696 belly pan?  Now to save my pennies! 

[monsta]

.but Monsta, is this link for new 696 belly pan?

nah,  thats where i got one to fit mine...  (93 M900)

[Juan]

l'm glad more people are adding b-pans, l had  a strugle with it just because of the naked nature of the monster. l really like  my bike better with it than with out.

[NekkedChic]

NICE Juan! agree-much better with belly pan -I want one now too!!