S4RS Full Arrow exhaust up 3in.

[desmoworks]

That is such a beautiful monster! The Arrow system really looks fantastic on there!

[SikDuc]

Ok...Very cool.  If the pipes twist and not 'flex or bend' then that's a good thing.  I'll wait for the pics and measurements on how much you cut off.  I know it might vary from bike to bike but I would like an idea. Thanks,

Lou

[ICON]

Give me ten min. I'll have the pics.

[Gus Duc]

Beautiful man

Can I buy you some beer & have you do mine   I'm local

p.s  Now raise your rear ride height & you'll gain another 3" of space between the cans & the rear wheel

[ICON]

Beautiful man

Can I buy you some beer & have you do mine   I'm local

p.s  Now raise your rear ride height & you'll gain another 3" of space between the cans & the rear wheel

Sure brother, anytime.    Oh, she's already showing 5 threads on each side of the ride height. 

[SikDuc]

Hey, thanks for the pics!  I'll take another look at my bike and make a decision  How bout them rear passenger pegs....Did they fit?

Lou

[ICON]

Ok, here we go. What I did first was cut the bracket several times to get the height I wanted. I did not worry about the hole I would be drilling in the bike/frame just yet. Once I got the cans where I wanted them, I drilled them while on the bike. I had my knee supporting the cans. Once they went through, I lowered the cans and drilled the back of the Black/bike bracket. I used the same hole-size as the stock Arrow bracket and the same size screw/bolt. I went a tad longer on the hole I drilled.. I also used the stock Arrow washer for the Bolt. As you can see, I used the stock Arrow bolt and mounted it in the stock location to give the cans support so they would not hit the rear tire.

Hope this makes sense. I know the pics/bracket look harsh, but I plan to remove it someday. Sand it and have it powder coated black.... Some day.

More pics on my flickr page.

[ICON]

Hey, thanks for the pics!  I'll take another look at my bike and make a decision  How bout them rear passenger pegs....Did they fit?

Lou

Just came back and yes, "MY" stock passenger pegs fit with about 1in. left between the healguard and the can.

[SikDuc]

Awesome.  Gotta be able to take my girl for a ride sometimes!

Thanks again,

Lou

[ute]

ICON thanks for thinking outside the box with this

with the shotgun arrow system it always bugged me that i lost the line of the sss  now the  clean look is there

thanks for the extra pics

good job

[Gus Duc]

How close are the pipes to the swingarm

I was looking at my S2R1K & it's already really close............. about 2 mm now...... I know the systems are different so perhaps I won't be able to raise mine

[ICON]

How close are the pipes to the swingarm

I was looking at my S2R1K & it's already really close............. about 2 mm now...... I know the systems are different so perhaps I won't be able to raise mine

I would say about an inch and they are 50mm too.

[ICON]

ICON thanks for thinking outside the box with this

with the shotgun arrow system it always bugged me that i lost the line of the sss  now the  clean look is there

thanks for the extra pics

good job

ute.....your icon is creepy man. Clowns freak me out. 

[WFO58]

I just did the ICON rotation procedure on my Arrow muffs and it is good.   I drilled the frame bracket hole in front of the original hole and chopped the bracket a little different. I dont seem to need a bolt in the original hole either. It really does look much better. Thanks for a great idea and the balls to do it first!!

Ride safe

Tim

[c_rex]

Nice work yo!  Looks great.  I like those cans much better than the stock shotguns and your repositioning is just what the doctor ordered.