Oz Monster Trading Post

[Dockstrada]

Hey Vince,

Just spoke to the guy that has the warmers and he said they were podium, with a wave design.
He also said it fits 16,17,18 19 inch diameter tyres. If you want i can get you some pictures  for you tomorrow. This guy is our bike mechanic and also works with the guys that did Betty's pipes

cheers Jukie

EDIT: .... and he has the carry bag too.

yeh Jukie some pics would be great 

[Jukie]

yeh Jukie some pics would be great 

I'll sort it sometime tomorrow.

[Jukie]

Unfortunately I have some bad news Vince. It seems the tyre warmers were sortof on consignment and a bit of a fault was detected during testing of the rear warmer. He is going to send them back from whence they came, will PM you if I have any news.

Sorry for stuffing you around.

[kursed]

looking for a good tail tidy kit to replace my ugly stock beer tray. Anyone have a kit supplier in oz that will fit the NSW plate well? I saw one on ebay but I don't really know about the quality, the photos where pretty terrible so I couldn't see much!
I want something that will suit the length of the termis I will *eventually* get.
thanks folks

p.s. i saw a threar recently that had lots of tail chop pics, but I can't locate! Anyone?

[mattyvas]

G'day Kursed,

     I got mine when we were all over OTB. It is a Cookie 1 kit. You can get them via Monster parts.
Jeff sells that one and a Competition Werks one for about $100 US.
Sydmonster also just did a nice chop on one of the other bikes Melvins bling sled.
If you ask nicely and offer gifts of Gold Frankensense and Merth (my WYD08 reference) he may be able to make you a custom job.
But I can't speak further than that for him.

cheers
Matty...

[Spider]

looking for a good tail tidy kit to replace my ugly stock beer tray. Anyone have a kit supplier in oz that will fit the NSW plate well? I saw one on ebay but I don't really know about the quality, the photos where pretty terrible so I couldn't see much!
I want something that will suit the length of the termis I will *eventually* get.
thanks folks

p.s. i saw a thread recently that had lots of tail chop pics, but I can't locate! Anyone?

and if you read my thread called A spider's journey it has the half tail chop - still requires 85mm of rail chop or you can go the no chop - Techno from Tassie has that one, both products available from Monsterparts. My latest order was here in 6 days - the only bits of carbon I bought from Australia took 45 days!

[tricolore]

looking for a good tail tidy kit to replace my ugly stock beer tray. Anyone have a kit supplier in oz that will fit the NSW plate well? I saw one on ebay but I don't really know about the quality, the photos where pretty terrible so I couldn't see much!
I want something that will suit the length of the termis I will *eventually* get.
thanks folks

p.s. i saw a threar recently that had lots of tail chop pics, but I can't locate! Anyone?

I am not sure, are you after a tail tidy or tail cop 

[kursed]

definately tail cop dude oh ok, a tail chop then. they seem to look the freaken bizness over keeping the stock frame. what where they thinking with that frame from factory anyway. lol/

[tricolore]

For sale, Billet clutch and brake reservior caps for S*r. 3 pieces, Bought them from flea bay, opened the packet, dont like the colour on my bike. I paid $51.00 plus postage. Sell them for $50.00 plus postage ( i prefer rounded figures) pm me if you want to see pics or I will bring em on the next ride.
P.S they also suit 1098 - 848 if you know anyone.
Cheers Steve.

Exact the same. http://cgi.ebay.com.au/Ducati-748-851-916-998-848-1098-Billet-Reservoir-Caps-G_W0QQitemZ270255572956QQihZ017QQcategoryZ102691QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[ptooey]

Found another interesting auction:

White S4RS Sydney, starting bid $10k

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150275341621

[Dockstrada]

For sale, Billet clutch and brake reservior caps for S*r. 3 pieces, Bought them from flea bay, opened the packet, dont like the colour on my bike. I paid $51.00 plus postage. Sell them for $50.00 plus postage ( i prefer rounded figures) pm me if you want to see pics or I will bring em on the next ride.
P.S they also suit 1098 - 848 if you know anyone.
Cheers Steve.

Exact the same. http://cgi.ebay.com.au/Ducati-748-851-916-998-848-1098-Billet-Reservoir-Caps-G_W0QQitemZ270255572956QQihZ017QQcategoryZ102691QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

What wrong with the colore Tri is it the same as the ohlins or pazzo yellow 

[tricolore]

What wrong with the colore Tri is it the same as the ohlins or pazzo yellow 

Deeper/darker than the ohlins gold (thats what I was hoping to match ) not sure about the pazzo colour, It is very close to the colour in the picture on the fleabay site.

[Dockstrada]

Deeper/darker than the ohlins gold (thats what I was hoping to match ) not sure about the pazzo colour, It is very close to the colour in the picture on the fleabay site.

Yeh the pazzo yellow is a bee's dick darker than the Ohilns

[tricolore]

Anyone with s*r stock exhaust cans interested in swapping for my cored cans? They sound very good, not too loud but have a definate growl...

[brad black]

i'm thinking of selling the 750 engine in my 600 to then fit another engine made up of some of the bits i have laying around.  anyone interested as an upgrade for a 400 or 600?

'95 750 engine with the clutch slave cylinder in the clutch cover on the rh side of the engine. reco'd about 5,000km ago.  big valves, 900 cams , fbf hi comps, ignitech unit, 76 rwhp.  around $2,500 i guess.