Danmoto exhaust

[Desert Dust]

Mine sounds gooood! S2R 1000

[ducatiz]

You can go thru the int. site and check out.

Shipping from HK is about $60

[thurmanjr7]

I picked up the gp carbon danmotos figuring it was worth it if they worked or not because they were so cheap. I am absolutely in love with them. In my opinion they sound just as good as termis for a lot cheaper. With a k&n air filter they're about $300. As far as the performance goes I seem to have picked up a bit but I need to tune it because since the flow is so good the bike has leaned out a bit. IMO the sound alone was worth the money and after 1500 miles haven't had any hitches.

[NFJ79]

Anybody have experience with their mid-pipe?  Found them on fleabay for under $200.  I wonder if they fit my 2 into 1 Leo Vince?

[HotIce]

How's the plastic-ish/rubber-ish padding for the mount, holding on with the heat?

[Desert Dust]

Anybody have experience with their mid-pipe?  Found them on fleabay for under $200.  I wonder if they fit my 2 into 1 Leo Vince?

I'm planning on getting one for my S2R 1000, but they're only $130.00 on Danmoto's site.

[brad black]

has anyone put jisu's on an early monster?  i'm trying one up today and it's just a bit wacky.  the mount bracket they supply to go between the strap and mount i'm going to have almost horizontal, with the strap up under the pillion footrest mount.  otherwise they're really low.

and close to the swingarm no matter where they go.  maybe they're just too wide for the early ones.  maybe the link pipe has too much bend in it too.  might need to cut a slice out, but i haven't got mig wire to weld stainless.

[brad black]

i fitted one up.  the muffler is hard up under the pillion footrest part of the bracket.  still very close to the swingarm.  i took some photos, i'll get around to posting them.

i bent my first muffler strap to have it centred over the muffler, so i'll have to unbend and rebend it.  hopefully it'll work.

[NFJ79]

I'm planning on getting one for my S2R 1000, but they're only $130.00 on Danmoto's site.

I dont see them listed on his website.

[Desert Dust]

http://www.dan-moto.com/DM_INT/ducati-monster-s2r-1000-cat-eliminator-pipe-race-header-product-663.html

Try this URL.

[NFJ79]

http://www.dan-moto.com/DM_INT/ducati-monster-s2r-1000-cat-eliminator-pipe-race-header-product-663.html

Try this URL.

Awesome!  Thank you for the link!

[xsephirot]

So how do they sound with their baffles in? Would it be better to wrap additional fiberglass in there?

[thurmanjr7]

I'm planning on getting one for my S2R 1000, but they're only $130.00 on Danmoto's site.

Before you count out ebay check to see what shipping costs. They wanted $100 to ship my pipes to the U.S.

[He Man]

Before you count out ebay check to see what shipping costs. They wanted $100 to ship my pipes to the U.S.

which is the same price as the ebay prices.  i dont think they have leg room to really put discounts on anything.

[J5]

which is the same price as the ebay prices.  i dont think they have leg room to really put discounts on anything.

when i bought mine to australia there was a cheaper freight option on the danmoto website so only cost me $50 instead of $100