Concourse d'Elegance time again Sunday, 18th September

[PAUL M]

Fail solenoid terminal cover missing  

Better than poorly cut cable ties

(under clutch master)

[mattyvas]

I think you all need to stop cleaning and step away from the bike!

[monstermick58]

I think you all need to stop cleaning and step away from the bike!

   SERIOUSLY!!








                                   Mmick

[FIFO]

All that gold and carbon and you're missing the gold fork tubes...

Did have my eye on Teffs old forks but the tight arse wanted to much for them , Dez beat me to them anyway

I think you all need to stop cleaning and step away from the bike!

What are trying to say

[braando]

I think you all need to stop cleaning and step away from the bike!

I know exactly what you mean MV.......bloody children..........me you ask...?
I will dig mine out of  hibernation, probably Saturday arvo after work and run my eye over it....if i get time of course......thats about all........ ..............Those 2 valvers are an embarrasing lot   !............

[suzyj]

Oh well, it was nice while it lasted.



The lesson is that black fabric dye works well on belt covers, sprocket cover, and indicators.  On beer trays and side panels, not so much.

[Wells]

Oh well, it was nice while it lasted.

NNNOOOOOOOOOO!
The bike was looking so nice the other week.

Spray them or something!
You can use my stock bear tray and side panels if you want. (beer tray is already off and the side panels are a quick unbolt.. one of them is already stickerless!)

You're not allowed to pull out now, not after all the 2V rivalry we've seen going on.


p.s. - might be worth a post in the mods forum if you haven't already. (disregard - of course you have)
p.p.s - the gold lettering on the black box in the back of your photo looks like the same bloody font that gollum used for his precious.

[FIFO]

Oh well, it was nice while it lasted.

The lesson is that black fabric dye works well on belt covers, sprocket cover, and indicators.  On beer trays and side panels, not so much.

Different plastic think it is abs on the tray and side covers you better race down to autobahn and grab a rattle can of vht paint and plastic primer 

[braando]

Oh well, it was nice while it lasted.



The lesson is that black fabric dye works well on belt covers, sprocket cover, and indicators.  On beer trays and side panels, not so much.

Got a spare one in the garage if that will help Suzy

[suzyj]

Awww, you guys are too sweet.  Thanks for the offer, but so far (I've done one of the side covers, and am part way through doing the beer tray) they come up nicely when I remove the blooming (and the textured surface) with 240 grit emery, then work my way through 400, 600, and 1200 grit.  They look different to the factory finish, but not as different as they would if I painted them.

Actually I quite like the result.  And they're just right for making molds from...

[monstermick58]

Awww, you guys are too sweet.
Actually I quite like the result.  And they're just right for making molds from...

Why??




                                                    Mmick

[Wells]

Why??

Layer upon layer upon layer...
Can't wait to see the result!

[braando]

Why??




                                                   Mmick

Because we live on the north side Mmick.......but to be honest, upfront, yet ever so humble,......I feel it was me who Suzy was referring to.....

[Betty]

Because we live on the north side Mmick.......but to be honest, upfront, yet humble,......I feel it was me who Suzy was referring to.....

I think Mick was asking why would Suzy want to make molds ... not who tastes the tangiest.

[braando]

I think Mick was asking why would Suzy want to make molds ... not who tastes the tangiest.

Please Betty .....let me down gently, I am allowed to dream though............