News:

This Forum is not for sale

 

CycleCat Clip Ons

Started by The ModFather, March 20, 2012, 09:11:06 PM

Previous topic - Next topic

The ModFather

I have a sweet set of Cycle Cat Clip Ons with Risers but have been debating putting them on my 2005 Monster 620. Right now the bike is very comfortable ( I currently have Rizoma handlebars) but I love the look of Clip Ons.  With the Risers will they look that different than what I got now? It looks like they'll come in about 2" lower than the Rizoma handlebars? How much will it change the riding feel and control feel? Will it be uncomfortable for long rides? How hard is it to remove the Triple Tree. (I know there are threads on this last question but I thought I'd ask it anyway). Just trying to decide if I should do it or not. If the Triple Tree removal was easy I'd just do it and try them out but it sounds like a bit of a pain. Will I just get used to it either way once they're on? Any thoughts or opinions on these questions would be greatly appreciated. I cant decide here. I know I'll probably have to get coffin spacers as well.
2005 S2R 800 Analog Motorcycles Custom Build
2007 Sport Classic 1000S
2008 848 Track Bike
2015 Diavel Dark - Sold
2005 Monster 620 Dark - Sold

Dirty Duc

You don't need to pull the triple.  Get a buddy, Make a mark on the forks to index them to the triple (lower or upper, whichever you prefer) loosen the clamps on the forks, make him lift the front by the handlebars until you have clearance to slide the clipon thingy in between the top triple and the top of the fork.  Do same for other side.  Reassemble front end by making him hold the bike at just the right height (using the aforementioned index mark) while you tighten one triple clamp on each fork.  torque up the triples, set the clipons to the desired height... realize you installed them upside down and backwards, repeat.   ;D [Dolph]

The ModFather

2005 S2R 800 Analog Motorcycles Custom Build
2007 Sport Classic 1000S
2008 848 Track Bike
2015 Diavel Dark - Sold
2005 Monster 620 Dark - Sold

He Man

you can do it by urself if u have a front stand that picks it up from the triple. i just let the front drop, slide i over and pick up the wheel with my foot, and then clamp it back on.

im actually so lazy, that my riser clip ons are still on the bike ( im running rizoma handle bar now).
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!


Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU

The ModFather

HeMan Why'd you switch away from the riser clip-ons? My fear is I'll go to the trouble of putting them on and then decide I want to go back.
2005 S2R 800 Analog Motorcycles Custom Build
2007 Sport Classic 1000S
2008 848 Track Bike
2015 Diavel Dark - Sold
2005 Monster 620 Dark - Sold

He Man

My bike is a dialy commuter bike. I had cycle cats. But going down on them would suck because parts were unavailable.

They werent high enough for me and it hurt my back for longer rides ( im only 5'6 with 30 inch inseam).

stock bars were bent so i went with rizoma which is the best thing in the world. but the front gets a lot of vibration and "loose feel" in comparision to clip ons.

I had Tomaselli, to Cyclecat, to Apex with rise. The apex with rise was the best in comfort. if you slammed it down it could be no rise.
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!


Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU

NAKID

Quote from: He Man on March 21, 2012, 04:46:42 PM
They werent high enough for me and it hurt my back for longer rides ( im only 5'6 with 30 inch inseam).

stock bars were bent so i went with rizoma which is the best thing in the world. but the front gets a lot of vibration and "loose feel" in comparision to clip ons.

I had Tomaselli, to Cyclecat, to Apex with rise. The apex with rise was the best in comfort. if you slammed it down it could be no rise.

You could always lower the bike in front by dropping the triples on the forks and compesate by lowering the rear too. Would help with reach and your height issue...
2005 S2R800
2006 S2R1000
2015 Monster 821

He Man

let me correct myself, i was too leaned forward for commuting comfort.
when i had CC, i had the front of the bike dropped about 10mm.

my seat is already 1" lower. and im pretty much used to tippy toeing the bike.
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!


Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU

suzyj

Quote from: NAKID on March 21, 2012, 06:32:08 PM
You could always lower the bike in front by dropping the triples on the forks and compesate by lowering the rear too. Would help with reach and your height issue...

Or you could drop the front and raise the rear, and improve turn-in.


2007 Monster 695 with a few mods.
2013 Piaggio Typhoon 50 2 stroke speed demon.

NAKID

Quote from: suzyj on March 22, 2012, 02:17:48 PM
Or you could drop the front and raise the rear, and improve turn-in.

And make it more unstable? Sounds like a recipe for a tank slapper....
2005 S2R800
2006 S2R1000
2015 Monster 821

He Man

Quote from: NAKID on March 22, 2012, 06:12:35 PM
And make it more unstable? Sounds like a recipe for a tank slapper....

which is why i brought the front back up. its unstable enough as it is.

Going from clip ons to handle bars made it even worst, but then i raised the height back up and got a steering damper.
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!


Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU

Dirty Duc

Quote from: NAKID on March 22, 2012, 06:12:35 PM
And make it more unstable? Sounds like a recipe for a tank slapper....

60 series in the front, maybe an inch up in the rear, rizoma bars... I don't call it unstable, I call it responsive  [evil]  Relax, the supposed tank slapper doesn't materialize if you just relax... like in the song.  [coffee]

suzyj

Agreed.  I don't think the monster's geometry is particularly twitchy.  I've brought the back of mine up 20mm, and dropped the front maybe 5mm, and I'm liking it a lot.  I think it's a definite improve.  No sign of head shake and nice quick turn-in.

But that's just me.  YMMV, and that's why such things are adjustable.


2007 Monster 695 with a few mods.
2013 Piaggio Typhoon 50 2 stroke speed demon.

TJR178

I have the CC clips with risers (had them since I bought the bike new in '04.  I love them.  You can adjust the bars up and down don't forget.  Granted, the adjustments aren't huge, but they help.  I'm 6'3" and I have them set at their lowest.  I haven't changed them since I installed them and they feel great. 

He Man

Quote from: suzyj on March 23, 2012, 03:34:04 AM
Agreed.  I don't think the monster's geometry is particularly twitchy.  I've brought the back of mine up 20mm, and dropped the front maybe 5mm, and I'm liking it a lot.  I think it's a definite improve.  No sign of head shake and nice quick turn-in.

But that's just me.  YMMV, and that's why such things are adjustable.


i guess it also depends on your riding style, where you ride, and why you are riding. ive already had 2 tank slappers, 1 almost throwing me off the Manhattan bridge. Its just a comuting bike.

one day...either a 999 or an R1....
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!


Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU