ST2R - mild concept

[pitbull]

Love it!

[tuga27]

 

[Raux]

Finally have nonfango rear topbox mounts....now to find a topbox that fits and get it painted

[Raux]

Ok clutch, brakes, and all little details set. Going to exhaust shop in the morning. Shouldnhave completed bike tomorrow to tkae photos

[Raux]

Ok exhaust is done, but not as perfect as I wanted. But stock exhaust fits as well. The mts exhaust sits too far back but had to be to give ground clearance. Bike rides nice. Speedo not working?

[Raux]

[Raux]

[Grampa]

Neato

[koko64]

That's so well done it looks OEM.

C'mon Ducati, build a stroked 1100 Evo to 1200 for a long legged gait as a sports tourer. Give it a big air box with ram air for 110 hp and 85 Ft/lbs.

[ungeheuer]

Very nicely done 

[Duck-Stew]

Speedo not working?

Check the cable and also check to see if the tabbed ring in the wheel was installed after the wheel powdercoating.

[Raux]

Thanks. It works slow like its geared wrong or slipping. I switched from kmh to mph speedo, could that be issue?

[Raux]

Ok thinking I have a 916 speedo and it has different gearing for speedo drive than st2.

[ducpainter]

Ok thinking I have a 916 speedo and it has different gearing for speedo drive than st2.

If that's the case a drive from the SBK should work. I wasn't aware they used different ratios.

[MotoPsycho]

x amount of ground speed is just that, but I could see the scale of it being different presentation wise. I've never seen a KPH speedo up close to compare. Assuming sweep is the same, I'd think it would just be a matter fitting the numbers in the right places. At the same time though, I could see a little gear in there somewhere being a shade different, enough to throw it off.