News:

Welcome to the DMF

 

Do Pirelli tires have a wear strip?

Started by ejw24, July 03, 2008, 07:00:50 PM

Previous topic - Next topic

ejw24

Cleaning the chain tonight I noticed a spot in the center of the tire where some white is starting to come through.  Please tell me it's a wear strip and not the cords!
Taking the bike in next Friday for it's 6k service so I will get a new tire but I have a 150+ mile ride to the dealer. Thanks!
I'm having a failure to thrive...

Slide Panda

White = Chords

They do have wear indicators... which you've probably obliterated.  Get thee a new tire
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

j.davis

#2
Here are two different areas of the Pirelli on the rear of my VFR after I got home from my last ride.  If they look like your tire, you probably are looking at cords.

jD



ejw24

Quote from: j.davis on July 03, 2008, 08:12:10 PM
Here are two different areas of the Pirelli on the rear of my VFR after I got home from my last ride.  If they look like your tire, you probably are looking at chords.

jD




That's what I got showing, hope I can make it to Denver.

Thanks for the help guys!!
I'm having a failure to thrive...

Speeddog

Quote from: ejw24 on July 03, 2008, 08:22:46 PM
That's what I got showing, hope I can make it to Denver.

Thanks for the help guys!!

Take it by truck, trailer, van...... begged, borrowed, rented, stolen.....whatever..... please don't ride 150 miles on a tire with cords showing.
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

ejw24

Quote from: Speeddog on July 03, 2008, 09:07:56 PM
Take it by truck, trailer, van...... begged, borrowed, rented, stolen.....whatever..... please don't ride 150 miles on a tire with cords showing.

That's what I'm thinking, while the tire doesn't look nearly as bad as the one in the picture I don't want to chance it.
I'm having a failure to thrive...

Ducatista

Is there any shop at all local that can mount fresh rubber for you if the wheel is off the bike?  That would be better than a crash from a flat.   :-[
carbon fiber Superbike front fender, bar end mirrors, floating cast iron rotors, carbon fiber chin fairing, Cycle Cat frame sliders, Arrow carbon fiber low mount slip ons, Rizoma billet cam belt covers w/ plexi windows, Rizoma billet front sprocket cover, billet handlebar clamp, carbon fiber rear hugger, tail chop, open air box, Corbin seat, stainless clutch springs w/ black keepers, suicideless sidestand bolt, Evoluzione clutch slave cylinder

www.myspace.com/bitgoddess

ScottRNelson

You're taking a big chance riding a motorcycle 150 miles with cords already showing.  If it fails, it's not going to lose air slowly, and if it fails when you're riding at pretty high speed you might not be able to maintain control before you can get the bike stopped.  So even if you don't crash, you'll still have to haul it the rest of the way in a truck, but it will be more expensive for you than if you were to haul it in a truck in the first place.

If it were me, I would put a new tire on first, using a local motorcycle shop to put the tire on the rim, then ride it for the service.
Scott R. Nelson, 2001 XR650L, 2020 KTM 790 Adv R, Meridian, ID

ejw24

Quote from: ScottRNelson on July 05, 2008, 09:48:53 AM
If it were me, I would put a new tire on first, using a local motorcycle shop to put the tire on the rim, then ride it for the service.

Thanks for the advice, I'm going to trailer it to Denver.  A new tire at a local shop isn't an option.....Aspen is limited for any motorcycle services.
I'm having a failure to thrive...

EEL

Every pirelli I have ever owned matches the picture that was posted earlier. after the 3rd tire, I switched to Michelin.

CMDRDAVE

With out a wear strip, what should be used for a "tripwire" for tire replacement?  My Diablo's look good so far I just want to be carefull.
Insert witty comment here-->

Speeddog

Quote from: XJDAVE on July 06, 2008, 11:05:18 AM
With out a wear strip, what should be used for a "tripwire" for tire replacement?  My Diablo's look good so far I just want to be carefull.

Diablos have wear bars, I think all tires have to have them, by law.

They are noted, I believe by little pitchforks at the edge of the tread surface.
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

ScottRNelson

Wear bars look like the circled part of this tire.  You should have something similar on the Diablos.

Scott R. Nelson, 2001 XR650L, 2020 KTM 790 Adv R, Meridian, ID

Speeddog

Quote from: Speeddog on July 06, 2008, 01:25:06 PM
Diablos have wear bars, I think all tires have to have them, by law.

They are noted, I believe by little pitchforks at the edge of the tread surface.

Edit, there is little 'TWI' lettering right at the edge, and there's a shallow bar in one of the tread grooves, about an inch off of centerline.
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

CMDRDAVE

Ah Ha! but my TWI is right next to a "pitchfork"  [laugh]
Insert witty comment here-->