Quote from: Buck Naked on March 23, 2014, 08:37:26 AM
Love the satin paint job on the engine covers, swingarm, triples etc. Mind telling us more about the paint? (Brand, application type, etc) great work really enjoying your build!

I used those two spray cans. First i sand the part to make the surface smooth then two to three layers of the color 20 min between and for the end two layers of ral sprays for matte finish....

Hey everybody today i finised with wiring and put on the throttle body, filter box water radiator i also but the tail light...









i also came up with an idea of how i was going to lower my gauge because many have done it with similar way but not at an injection model which is a little bit different how this are behind the head light.... My idea is to use the to piece of metal that they go into the u bracket to support the gauges few modifications were necessary of course but i think it was worth it and this is the result....







after everything was fine i took the u bracket off so i can paint it of course, i will upload the final stage tomorrow

I think you have a great attitude about your project and it helps you create a very nice bike.
I enjoy watching your progress.

Very cool work with the best colors 

You should slap some quick disconnects on those two fuel lines sticking out while it is apart.

Makes removing the tank so much easier.

thanks my friend for your kind words.... lazylightnin717 thanks for the tip man i will do!!!

Quote from: lazylightnin717 on March 24, 2014, 06:22:21 PM


You should slap some quick disconnects on those two fuel lines sticking out while it is apart.

Makes removing the tank so much easier.

Yes thanks for the tip indeed I'll def be doing that as well now.

Here is what I went with. Very well made product. Just tell them what size you need


http://www.colder.com/





Back you to Metzis 

Quote from: lazylightnin717 on March 25, 2014, 04:43:03 PM
Here is what I went with. Very well made product. Just tell them what size you need


http://www.colder.com/





Back you to Metzis 

It never ends...never fukn ends. My poor wallet.

wow these look awesome!!!! They for sure go in my "to do list"!!!!

Few more pics & i am waiting for the handlebars the tank and the cowl to be paint also the new headlight i've ordered.....











later in the day i will put the exhaust on the bike!!

What kind of headlight did ya order? (particularly curious about that so I'm being impatient here

Quote from: Buck Naked on March 26, 2014, 07:11:38 AM
What kind of headlight did ya order? (particularly curious about that so I'm being impatient here

Just a corel draw preview tha actual headlight should be here next week!!!!



p.s the size is mesured aprox because the angle of the two pictures are different also the blue blur in the headlight is from the bulb...

Few more pics before the the first vrooooummmmm Also i decided that i didn't want the cheap danmoto exhaust on my new project so i will settle down with the original mufflers for now. Custom full exhaust is on the way shortly but i have to settle my debt to the guy who did the painting job first So....

You have to watch with those quick disconnects that you don't kink the fuel lines.  You will restrict the fuel flow.  You will probably have to re-route the fuel lines.

No re-route.

Just take them right above the clutch like stock.

i think in order to place the quick release fuel plug i going to shorten the fuel lines 4-5 cm....
Today i receive the head light after few minutes i figure out a way to mount it on the bike properly because it didn't have nuts in the upper holes... So!!!







what you think?